Joint Entrance Exam (JEE) Advance

JEE Advanced

About the Exam

The Joint Entrance Examination Advanced - JEE Advanced is an annual engineering entrance exam in India. It is considered one of the most competitive and prestigious examinations in the country and is conducted for admission to the Indian Institutes of Technology (IITs), which are among the top prestigious engineering institutes in India.

The Indian Institutes of Technology (IITs) are institutions of national importance established through an Act of Parliament to foster excellence in education. At present, there are 23 IITs, and a single exam is conducted for admission into IITs in two stages.

It is a highly competitive examination that assesses not only the students' knowledge but also their analytical and problem-solving skills.

In the first stage, approximately 13 lac students take exams, and in the second stage, approximately 2 lac students are selected for the second stage. Out of which, approximately 20,000 students are selected for IITs.

JEE Advanced 2024 Organizing Institute: Indian Institute of Technology, Madras

Eligibility Criteria

To appear for JEE Advanced, a candidate must first qualify in the JEE Main exam, which is the first stage of the two-part Joint Entrance Examination.

Performance in Class XII (or Equivalent) Board Examination for admission to IITs

 

The Candidates must satisfy at least one of the following two criteria with Physics, Chemistry and Mathematics as compulsory subjects in the year of first appearance in the Class XII (or equivalent examination)

  • Must have secured at least 75% aggregate marks in the Class XII (or equivalent) Board examination. The aggregate marks for SC, ST and PwD candidates should be at least 65%.
  • Must be within the category-wise top 20 percentile of successful candidates in their respective Class XII (or equivalent) board examination.
 

ELIGIBILITY CRITERIA FOR INDIAN NATIONALS FOR APPEARING FOR JEE (ADVANCED) 2024

Age Limit

Candidates should have been born on or after October 1, 1999.

Age Relaxation:

Five years age relaxation is given to SC, ST, and PwD candidates, i.e. these candidates should have been born on or after October 1, 1994.

(As per 2024 Latest Information Brochure)  

Number of Attempts

A candidate can attempt JEE Advanced maximum of two times in two consecutive years.

Exam Pattern

Mode of Examination: Computer-Based Test (CBT) consists of two papers - Paper 1 and Paper 2

Exam Duration:  3 hours duration for each paper.

*Appearing in both the papers is mandatory.

  • The exam primarily assesses a candidate's deep understanding of Physics, Chemistry, and Mathematics. 
  • The question papers will consist of questions designed to test comprehension, reasoning and analytical ability of candidates.
  • The question papers will be in both English and Hindi languages.

 

JEE Advanced 2024 Syllabus

PHYSICS

General

General Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using simple pendulum, Young’s modulus - elasticity of the material Surface tension of water by capillary rise and effect of detergents. Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using u-v method, Speed of sound using resonance column, Verification of Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.

Mechanics

Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform circular motion; Relative velocity.

Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy.

Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic collisions. Rigid body, moment of inertia, parallel and perpendicular axes theorems, moment of inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies. Forced and damped oscillation (in one dimension), resonance. Linear and angular simple harmonic motions. Hooke’s law, Young’s modulus.

Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Kepler’s law, Geostationary orbits, Motion of planets and satellites in circular orbits; Escape velocity. Pressure in a fluid; Pascal’s law;Buoyancy; Surface energy and surface tension, angle of contact, drops, bubbles and capillary rise.

Viscosity (Poiseuille’s equation excluded), Modulus of rigidity and bulk modulus in mechanics. Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications.

Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound)

Thermal Physics

Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gases); Second law of thermodynamics, reversible and irreversible processes, Carnot engine and its efficiency; Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.

Electricity and Magnestism

Coulomb’s law; Electric field and potential; Electrical potential energy of a system of point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines; Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor.

Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells; Kirchhoff’s laws and simple applications; Heating effect of current. Biot–Savart’s law and Ampere’s law; Magnetic field near a current-carrying straight wire, along the axis of a circular coil and inside a long straight solenoid; Force on a moving charge and on a current-carrying wire in a uniform magnetic field. Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; Moving coil galvanometer, voltmeter, ammeter and their conversions.

Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC, LR, LC and LCR(in series) circuits with d.c. and a.c. sources.

Electromagtic Waves

Electromagnetic waves and their characteristics. Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma rays) including elementary facts about their uses.

Optics

Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification. Wave nature of light: Huygen’s principle, interference limited to Young’s double slit experiment. Diffraction due to a single slit. Polarization of light, plane polarized light; Brewster's law, Polaroids.

Modern Physics

Atomic nucleus; α, β and γ radiations; Law of radioactive decay; Decay constant; Half-life and mean life; Binding energy and its calculation; Fission and fusion processes; Energy calculation in these processes.

Photoelectric effect; Bohr’s theory of hydrogen-like atoms; Characteristic and continuous X-rays, Moseley’s law; de Broglie wavelength of matter waves.

 

CHEMISTRY

General Topics

Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept and stoichiometry) involving common oxidation-reduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality.

States of Matter: Gases and Liquids

Gas laws and ideal gas equation, absolute scale of temperature; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Diffusion of gases. Intermolecular interactions: types, distance dependence, and their effect on properties; Liquids: vapour pressure, surface tension, viscosity.

Atomic Structure

Bohr model, spectrum of hydrogen atom; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom: Energies, quantum numbers, wave function and probability density (plots only), shapes of s, p and d orbitals; Aufbau principle; Pauli’s exclusion principle and Hund’s rule.

Chemical Bonding and Molecular Structure

Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Molecular orbital energy diagrams for homonuclear diatomic species (up to Ne2); Hydrogen bond; Polarity in molecules, dipole moment; VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).

Chemical Thermodynamics

Intensive and extensive properties, state functions, First law of thermodynamics; Internal energy, work (pressure-volume only) and heat; Enthalpy, heat capacity, standard state, Hess’s law; Enthalpy of reaction, fusion and vapourization, and lattice enthalpy; Second law of thermodynamics; Entropy; Gibbs energy; Criteria of equilibrium and spontaneity.

Chemical and Ionic Equilibrium

Law of mass action; Significance of ȟܩ and ȟܩٓ in chemical equilibrium; Equilibrium constant (Kp and Kc) and reaction quotient, Le Chatelier’s principle (effect of concentration, temperature and pressure); Solubility product and its applications, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.

Electrochemistry

Electrochemical cells and cell reactions; Standard electrode potentials; Electrochemical work, Nernst equation; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Batteries: Primary and Secondary, fuel cells; Corrosion.

Chemical Kinetics

Rates of chemical reactions; Order and molecularity of reactions; Rate law, rate constant, half-life; Differential and integrated rate expressions for zero and first order reactions; Temperature dependence of rate constant (Arrhenius equation and activation energy); Catalysis: Homogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism.

Solid State

Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), close packed structure of solids (cubic and hexagonal), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii and radius ratio, point defects.

Solutions

Henry’s law; Raoult’s law; Ideal solutions; Colligative properties: lowering of vapour pressure, elevation of boiling point, depression of freezing point, and osmotic pressure; van’t Hoff factor.

Surface Chemistry

Elementary concepts of adsorption: Physisorption and Chemisorption, Freundlich adsorption isotherm; Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples).

Classification of Elements and Periodicity in Properties

Modern periodic law and the present form of periodic table; electronic configuration of elements; periodic trends in atomic radius, ionic radius, ionization enthalpy, electron gain enthalpy, valence, oxidation states, electronegativity, and chemical reactivity.

Hydrogen

Position of hydrogen in periodic table, occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides – ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide-preparation, reactions, use and structure; hydrogen as a fuel.

s-Block Elements

Alkali and alkaline earth metals-reactivity towards air, water, dihydrogen, halogens, acids; their reducing nature including solutions in liquid ammonia; uses of these elements; general characteristics of their oxides, hydroxides, halides, salts of oxoacids; anomalous behaviour of lithium and beryllium; preparation, properties, and uses of compounds of sodium (sodium carbonate, sodium chloride, sodium hydroxide, sodium hydrogen carbonate) and calcium (calcium oxide, calcium hydroxide, calcium carbonate, calcium sulphate).

p-Block Elements

Oxidation state and trends in chemical reactivity of elements of groups 13-17; anomalous properties of boron, carbon, nitrogen, oxygen, and fluorine with respect to other elements in their respective groups.

Group 13: Reactivity towards acids, alkalis, and halogens; preparation, properties, and uses of borax, orthoboric acid, diborane, boron trifluoride, aluminium chloride, and alums; uses of boron and aluminium.

Group 14: Reactivity towards water and halogen; allotropes of carbon and uses of carbon; preparation, properties, and uses of carbon monoxide, carbon dioxide, silicon dioxide, silicones, silicates, zeolites.

Group 15: Reactivity towards hydrogen, oxygen, and halogen; allotropes of phosphorous; preparation, properties, and uses of dinitrogen, ammonia, nitric acid, phosphine, phosphorus trichloride, phosphorus pentachloride; oxides of nitrogen and oxoacids of phosphorus.

Group 16: Reactivity towards hydrogen, oxygen, and halogen; simple oxides; allotropes of sulfur; preparation/manufacture, properties, and uses of dioxygen, ozone, sulfur dioxide, sulfuric acid; oxoacids of sulfur.

Group 17: Reactivity towards hydrogen, oxygen, and metals; preparation/manufacture, properties, and uses of chlorine, hydrogen chloride and interhalogen compounds; oxoacids of halogens, bleaching powder.

Group 18: Chemical properties and uses; compounds of xenon with fluorine and oxygen.

d-Block Elements

Oxidation states and their stability; standard electrode potentials; interstitial compounds; alloys; catalytic properties; applications; preparation, structure, and reactions of oxoanions of chromium and manganese.

f-Block Elements

Lanthanoid and actinoid contractions; oxidation states; general characteristics.

Coordination Compounds

Werner’s theory; Nomenclature, cis-trans and ionization isomerism, hybridization and geometries (linear, tetrahedral, square planar and octahedral) of mononuclear coordination compounds; Bonding [VBT and CFT (octahedral and tetrahedral fields)]; Magnetic properties (spin-only) and colour of 3d-series coordination compounds; Ligands and spectrochemical series; Stability; Importance and applications; Metal carbonyls.

Isolation of Metals

Metal ores and their concentration; extraction of crude metal from concentrated ores: thermodynamic (iron, copper, zinc) and electrochemical (aluminium) principles of metallurgy; cyanide process (silver and gold); refining.

Principles of Qualitative Analysis

Environmental Chemistry

Atmospheric pollution; water pollution; soil pollution; industrial waste; strategies to control environmental pollution; green chemistry.

Basic Principles of Organic Chemistry

Hybridisation of carbon; σ and π-bonds; Shapes of simple organic molecules; aromaticity; Structural and geometrical isomerism; Stereoisomers and stereochemical relationship (enantiomers, diastereomers, meso) of compounds containing only up to two asymmetric centres (R,S and E,Z configurations excluded); Determination of empirical and molecular formulae of simple compounds by combustion method only; IUPAC nomenclature of organic molecules (hydrocarbons, including simple cyclic hydrocarbons and their mono-functional and bi-functional derivatives only); Hydrogen bonding effects; Inductive, Resonance and Hyperconjugative effects; Acidity and basicity of organic compounds; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals.

Alkanes

Homologous series; Physical properties (melting points, boiling points and density) and effect of branching on them; Conformations of ethane and butane (Newman projections only); Preparation from alkyl halides and aliphatic carboxylic acids; Reactions: combustion, halogenation (including allylic and benzylic halogenation) and oxidation.

Alkenes and Alkynes

Physical properties (boiling points, density and dipole moments); Preparation by elimination reactions; Acid catalysed hydration (excluding the stereochemistry of addition and elimination); Metal acetylides; Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Electrophilic addition reactions of alkenes with X2, HX, HOX, (X=halogen); Effect of peroxide on addition reactions; cyclic polymerization reaction of alkynes.

Benzene

Structure; Electrophilic substitution reactions: halogenation, nitration, sulphonation, FriedelCrafts alkylation and acylation; Effect of directing groups (monosubstituted benzene) in these reactions.

Phenols

Physical properties; Preparation, Electrophilic substitution reactions of phenol (halogenation, nitration, sulphonation); Reimer-Tiemann reaction, Kolbe reaction; Esterification; Etherification; Aspirin synthesis; Oxidation and reduction reactions of phenol.

Alkyl Halides

Rearrangement reactions of alkyl carbocation; Grignard reactions; Nucleophilic substitution reactions and their stereochemical aspects.

Alcohols

Physical properties; Reactions: esterification, dehydration (formation of alkenes and ethers); Reactions with: sodium, phosphorus halides, ZnCl2/concentrated HCl, thionyl chloride; Conversion of alcohols into aldehydes, ketones and carboxylic acids.

Ethers

Preparation by Williamson’s synthesis; C-O bond cleavage reactions.

Aldehydes and Ketones

Preparation of: aldehydes and ketones from acid chlorides and nitriles; aldehydes from esters; benzaldehyde from toluene and benzene; Reactions: oxidation, reduction, oxime and hydrazone formation; Aldol condensation, Cannizzaro reaction; Haloform reaction; Nucleophilic addition reaction with RMgX, NaHSO3, HCN, alcohol, amine.

Carboxylic Acids

Physical properties; Preparation: from nitriles, Grignard reagents, hydrolysis of esters and amides; Preparation of benzoic acid from alkylbenzenes; Reactions: reduction, halogenation, formation of esters, acid chlorides and amides.

Amines

Preparation from nitro compounds, nitriles and amides; Reactions: Hoffmann bromamide degradation, Gabriel phthalimide synthesis; Reaction with nitrous acid, Azo coupling reaction of diazonium salts of aromatic amines; Sandmeyer and related reactions of diazonium salts; Carbylamine reaction, Hinsberg test, Alkylation and acylation reactions.

Haloarenes

Reactions: Fittig, Wurtz-Fittig; Nucleophilic aromatic substitution in haloarenes and substituted haloarenes (excluding benzyne mechanism and cine substitution).

Biomolecules

Carbohydrates: Classification; Mono- and di-saccharides (glucose and sucrose); Oxidation; Reduction; Glycoside formation and hydrolysis of disaccharides (sucrose, maltose, lactose); Anomers.

Proteins: Amino acids; Peptide linkage; Structure of peptides (primary and secondary); Types of proteins (fibrous and globular).

Nucleic acids: Chemical composition and structure of DNA and RNA.

Polymers

Types of polymerization (addition, condensation); Homo and copolymers; Natural rubber; Cellulose; Nylon; Teflon; Bakelite; PVC; Bio-degradable polymers; Applications of polymers.

Chemistry in Everyday Life

Drug-target interaction; Therapeutic action, and examples (excluding structures), of antacids, antihistamines, tranquilizers, analgesics, antimicrobials, and antifertility drugs; Artificial sweeteners (names only); Soaps, detergents, and cleansing action.

Practical Organic Chemistry

Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino and nitro.

 

MATHEMATICS

Sets, Relations and Functions

Sets and their representations, different kinds of sets (empty, finite and infinite), algebra of sets, intersection, complement, difference and symmetric difference of sets and their algebraic properties, De-Morgan’s laws on union, intersection, difference (for finite number of sets) and practical problems based on them.

Cartesian product of finite sets, ordered pair, relations, domain and codomain of relations, equivalence relation

Function as a special case of relation, functions as mappings, domain, codomain, range of functions, invertible functions, even and odd functions, into, onto and one-to-one functions, special functions (polynomial, trigonometric, exponential, logarithmic, power, absolute value, greatest integer etc.), sum, difference, product and composition of functions.

Algebra

Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations.

Statement of fundamental theorem of algebra, Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots.

Arithmetic and geometric progressions, arithmetic and geometric means, sums of finite arithmetic and geometric progressions, infinite geometric series, sum of the first n natural numbers, sums of squares and cubes of the first n natural numbers. Logarithms and their properties, permutations and combinations, binomial theorem for a positive integral index, properties of binomial coefficients.

Matrices

Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, elementary row and column transformations, determinant of a square matrix of order up to three, adjoint of a matrix, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.

Probability and Statistics

Random experiment, sample space, different types of events (impossible, simple, compound), addition and multiplication rules of probability, conditional probability, independence of events, total probability, Bayes Theorem, computation of probability of events using permutations and combinations.

Measure of central tendency and dispersion, mean, median, mode, mean deviation, standard deviation and variance of grouped and ungrouped data, analysis of the frequency distribution with same mean but different variance, random variable, mean and variance of the random variable.

Trigonometry

Trigonometric functions, their periodicity and graphs, addition and subtraction formulae, formulae involving multiple and sub-multiple angles, general solution of trigonometric equations.

Inverse trigonometric functions (principal value only) and their elementary properties.

Analytical Geometry

Two dimensions: Cartesian coordinates, distance between two points, section formulae, shift of origin.

Equation of a straight line in various forms, angle between two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle.

Equation of a circle in various forms, equations of tangent, normal and chord. Parametric equations of a circle, intersection of a circle with a straight line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line. Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal. Locus problems.

Three dimensions: Distance between two points, direction cosines and direction ratios, equation of a straight line in space, skew lines, shortest distance between two lines, equation of a plane, distance of a point from a plane, angle between two lines, angle between two planes, angle between a line and the plane, coplanar lines.

Differential Calculus

Limit of a function at a real number, continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions.

Continuity of composite functions, intermediate value property of continuous functions. Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions.

Tangents and normals, increasing and decreasing functions, derivatives of order two, maximum and minimum values of a function, Rolle’s theorem and Lagrange’s mean value theorem, geometric interpretation of the two theorems, derivatives up to order two of implicit functions, geometric interpretation of derivatives.

Integral Calculus Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals as the limit of sums, definite integral and their properties, fundamental theorem of integral calculus.

Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas bounded by simple curves. Formation of ordinary differential equations, solution of homogeneous differential equations of first order and first degree, separation of variables method, linear first order differential equations.

Vectors

Addition of vectors, scalar multiplication, dot and cross products, scalar and vector triple products, and their geometrical interpretations.

 

Admission Cut off

The JEE Advanced exam is highly competitive. The cutoff is the minimum score required to pass the exam stage and advance. Those scoring equal to or above the cutoff can participate in the counseling process. The cutoff and rank list are crucial for admission to top IIT institutes in the country. The conducting authority releases two types of cutoffs: admission cutoff and qualifying cutoff, which depend on various factors and may vary annually.

JEE Advanced Cutoff 2024

Category Minimum Qualifying Marks in Each Subject Minimum Aggregate Marks
Common rank list (CRL) 10 109
OBC-NCL rank list 9 98
General EWS rank list 9 98
SC rank list 5 54
ST rank list 5 54
Common PwD rank list 5 54
OBC-NCL PwD rank list 5 54
General-EWS PwD rank list 5 54
SC PwD rank list 5 54
ST PwD rank list 5 54
Preparatory course (PC) rank lists 2 27

JEE Advanced Cutoff 2023

Category Minimum Qualifying Marks in Each Subject Minimum Aggregate Marks
Common rank list (CRL) 8 86
OBC-NCL rank list 7 77
General EWS rank list 7 77
SC rank list 4 43
ST rank list 4 43
Common PwD rank list 4 43
OBC-NCL PwD rank list 4 43
General-EWS PwD rank list 4 43
SC PwD rank list 4 43
ST PwD rank list 4 43
Preparatory course (PC) rank lists 2 22

JEE Advanced Cutoff 2022

IIT Bombay has released the JEE Advanced 2022 cutoff. We have provided the qualifying and admission cutoff for JEE Advanced 2022 in the table below.

Category Minimum Qualifying Marks in Each Subject Minimum Aggregate Marks
Common rank list (CRL) 5 55
OBC-NCL rank list 5 50
General EWS rank list 5 50
SC rank list 3 28
ST rank list 3 28
Common PwD rank list 5 28
OBC-NCL PwD rank list 3 28
General-EWS PwD rank list 5 28
SC PwD rank list 3 28
ST PwD rank list 5 28
Preparatory course (PC) rank lists 3 14

JoSAA Counselling 2024

JoSAA(Joint Seat Allocation Authority) regulates the admission & seat allocation process for 118 prestigious engineering institutes in India. It is a centralised counselling process for admissions to various academic programs offered by prestigious IITs, IISc, NITs and other institutions. 

JoSAA Eligibility Criteria

Candidates must fulfil the following eligibility criteria to participate in JoSAA Counselling 2024.

  1. Candidates must have qualified in JEE Advanced 2024

  2. Must have passed class XII or equivalent examination and secured at least 75% aggregate marks. 

  3. The aggregate marks for SC, ST and PwD candidates should be at least 65%.

 

JoSAA Official Website: https://josaa.nic.in/ 

JEE Advanced Marks vs Rank

After analysing previous years' JEE Advanced results we have provided an approximate range of JEE Advanced Marks vs Rank. Soon after the exam, the examination authority releases the answer keys. After calculating their marks, the candidates can refer to the JEE Advanced Marks vs Rank approximate analysis to calculate their expected rank range in the JEE Advanced based on the marks secured out of 360.

Marks Range out of 360 Expected ranks (Approx)
335 Marks to 308 Marks 10 to 50
285 Marks to 279 Marks 100 to 200
230 Marks to 224 Marks 700 to 800
212 Marks to 209 Marks 1100 to 1200
200 Marks to 197 Marks 1500 to 1600
191 Marks to 189 Marks 1900 to 2000
177 Marks to 175 Marks 2700 to 2800
172 Marks to 170 Marks 3100 to 3200
163 Marks to 162 Marks 3900 to 4000
155 Marks to 154 Marks 4700 to 4800

Frequently Asked Questions

JEE Advanced is a national-level engineering entrance examination in India. It is conducted for admission to undergraduate programs (B.Tech) at the Indian Institutes of Technology (IITs).

To be eligible for JEE Advanced, a candidate must qualify in JEE Main and meet other eligibility criteria set by the exam conducting authority. Eligibility criteria may include age limits, educational qualifications, and nationality requirements.

Candidates can attempt JEE Advanced a maximum of two times in consecutive years. However, eligibility rules can change, so it's crucial to check the latest information.

JEE Advanced ranks are calculated based on a candidate's performance in the examination. The rank is determined by considering the aggregate marks scored in both Paper 1 and Paper 2.

The syllabus for JEE Advanced is typically based on topics in Physics, Chemistry, and Mathematics. It is extensive and covers a wide range of concepts from these subjects. Candidates should refer to the official JEE Advanced website  for the detailed syllabus

The cutoff marks for JEE Advanced vary from year to year and depend on factors like the difficulty level of the exam and the performance of candidates. The cutoff marks are the minimum marks required to be eligible for counseling and seat allocation.

JEE Main is the first stage of the Joint Entrance Examination, while JEE Advanced is the second stage. JEE Main is conducted for admission to various engineering colleges in India, including NITs, IIITs, and GFTIs, whereas JEE Advanced is specifically for admission to the IITs.

YES. You are eligible to appear for JEE Advanced 2024, provided you also satisfy all the eligibility criteria mentioned in the Information Brochure (see Clause11. Eligibility Criteria for Indian Nationals appearing for JEE Advanced 2024.

You can find detailed information about JEE Advanced, including eligibility criteria, exam dates, application procedures, and updates, on the official JEE Advanced website. Kindly visit: https://jeeadv.ac.in/

NO. There is no need to indicate QUESTION paper language at the time of JEE Advanced 2024 registration. Candidates will have the option to choose their preferred language (English or Hindi), as the default language for viewing the questions, at the start of the Computer Based Test (CBT) examination of JEE Advanced 2024.

JEE Advanced is used for admission to IITs across India. There are 23 IITs participating in the JEE Advanced examination.

S.No.  

Name of the Institute

   Place

1

Indian Institute of Technology Guwahati

Guwahati

2

Indian Institute of Technology Bhubaneswar

Bhubaneswar

3

Indian Institute of Technology Bhilai

Bhilai

4

Indian Institute of Technology Bombay

Bombay

5

Indian Institute of Technology Delhi

New Delhi

6

Indian Institute of Technology (ISM) Dhanbad      

Dhanbad

7

Indian Institute of Technology Dharwad

Dharwad

8

Indian Institute of Technology Gandhinagar

Gandhinagar

9

Indian Institute of Technology Goa

Goa

10

Indian Institute of Technology (BHU)

Varanasi

11

Indian Institute of Technology Hyderabad

Hyderabad

12

Indian Institute of Technology Indore

Indore

13

Indian Institute of Technology Jammu

Jammu

14

Indian Institute of Technology Jodhpur

Jodhpur

15

Indian Institute of Technology Kanpur

Kanpur

16

Indian Institute of Technology Kharagpur

Kharagpur

17

Indian Institute of Technology Madras

Chennai

18

Indian Institute of Technology Mandi

Mandi

19

Indian Institute of Technology Palakkad

Palakkad

20

Indian Institute of Technology Patna

Patna

21

Indian Institute of Technology Roorkee

Roorkee

22

Indian Institute of Technology Ropar

Ropar

23

Indian Institute of Technology Tirupati

Tirupati

 

Yes, candidates have the flexibility to choose the order in which they want to attempt the three subjects (Physics, Chemistry, and Mathematics) in both Paper 1 and Paper 2.

Yes, there is negative marking in JEE Advanced for incorrect answers in multiple-choice questions. However, there is no negative marking for incorrect answers in the numerical answer-type questions.

Yes, at the start of each JEE Advance paper, you will be given a "Scribble Pad" (containing blank sheets for rough work). On this Scribble Pad, you can do all your calculations. You must bring your own pen or pencil.

Yes, writing both paper I and Paper II are compulsory in JEE Advance.

No, only candidates who qualify in JEE Main are eligible to appear for JEE Advanced. JEE Main serves as the first stage of the selection process.